CVE Explorer

Some externally supplied values stored by the device may be rendered in the web interface without sufficient output encoding. An attacker who can influence one of these values could cause script execution in the browser of a user who views an affected page. Exploitation requires an attacker to influence a stored value and a user to view a page that renders it.

An access-control vulnerability has been identified in the web server configuration. Some resources intended for on-device use only could be accessed remotely by an unauthenticated attacker with network access to the web interface. The accessible resources do not expose credentials or provide administrative functionality, but may include non-public device content, such as screen-saver content or assets used by the web interface.

A denial-of-service vulnerability has been identified in the Miracast over Infrastructure Connection Establishment (MICE) service. An unauthenticated attacker with network access to the MICE service could consume available connection capacity, preventing legitimate users from establishing MICE-based Miracast connections while the condition persists. Miracast P2P is not affected. MICE is disabled in the default configuration and must be explicitly enabled by the customer. On most devices, Miracast P2P is available independently of MICE, but a complete disruption of Miracast can occur on some devices when WLAN is configured for Infrastructure mode.

The jose library accepts ECDSA (ES256, ES256K, ES384, and ES512) JWS signatures of a non-canonical length. When verifying an ECDSA signature, jose_jwk_kty_ec:verify/4 in src/jwk/jose_jwk_kty_ec.erl splits the raw signature in half by its actual byte length (split_binary(Signature, byte_size(Signature) div 2)) instead of enforcing the fixed length required by RFC 7518 §3.4, and then decodes each half with crypto:bytes_to_integer/1, which ignores leading zero bytes. As a result, an attacker who holds one valid token can prepend leading zero bytes to each of the R and S halves to produce longer signatures that still split evenly and decode to the same (r, s) pair, so many distinct signature byte strings all verify against the same key (signature malleability). This does not allow forging new payloads or impersonating a signer, because the underlying (r, s) values are unchanged. It does defeat any security control that assumes a valid token or its signature is unique, such as token-revocation-by-hash, replay or idempotency caches, and deduplication logic. This issue affects jose: from 1.0.0 before 1.11.13.

Inefficient Algorithmic Complexity in erlang-jose allows an unauthenticated remote attacker to cause a CPU-exhaustion denial of service by submitting a crafted RSA JSON Web Key. When an application parses an untrusted JWK through the public jose_jwk:from_binary/1 or jose_jwk:from_map/1 API (or the Elixir wrappers JOSE.JWK.from_binary/1 and JOSE.JWK.from_map/1), an RSA private key that supplies d, e, and n but omits all Chinese Remainder Theorem parameters (p, q, dp, dq, qi) is routed into convert_sfm_to_crt/1, which tries to recover the missing primes by factoring the modulus. The three integers are read straight from the base64url input and are never validated as a real RSA key. When the modulus cannot be split into two factors (for example, when it is itself prime), the search loop convert_sfm_to_crt_find_p/6 performs a modular exponentiation over the attacker-sized modulus on every iteration and never succeeds. A single request of a few hundred bytes forces close to one CPU-second of work before an internal one-second watchdog kills the worker, and a larger modulus raises the cost further. By flooding such requests an attacker can saturate every scheduler and deny service, without credentials, a valid RSA key, or any special configuration. This issue affects jose: from 1.7.7 before 1.11.13.

Observable Timing Discrepancy vulnerability in potatosalad jose allows recovery of a long-term X25519 private key through a timing side channel in the pure-Erlang Curve25519 fallback. The pure-Erlang X25519 implementation performs scalar multiplication over the secret private key using a recursive Montgomery ladder (jose_jwa_x25519:curve25519/2) whose clauses branch on individual bits of the clamped private scalar, and whose per-step operations (jose_jwa_x25519:montgomery_add/3 and jose_jwa_x25519:montgomery_double/1) and field inversion are built from value-dependent Erlang bignum arithmetic (multiplication, remainder, and modular exponentiation). Although the ladder is operation-count balanced and fixed at 254 steps, the concrete integer values processed at each step, and therefore the running time, depend on the secret scalar. The execution time of the public entry points jose_jwa_x25519:scalarmult/2, jose_jwa_x25519:x25519/2, jose_jwa_x25519:x25519_base/1, and jose_jwa_x25519:sk_to_pk/1 is thus a function of the private key. This path is reachable from the public API, most notably when a service decrypts attacker-supplied ECDH-ES (JWE) messages with a long-term X25519 key (for example through JOSE.JWK.box_decrypt_ecdh_es/2, which reaches jose_jwa_curve25519:x25519_shared_secret/2 and the ladder). An attacker who can submit ciphertexts and measure decryption timing can, in principle, recover the private key bit by bit, defeating the resistance X25519 was designed to provide. Recovery of the key compromises the confidentiality and authenticity of all data protected by it. This issue affects jose: from 1.10.0 before 1.11.13.

Use of Password Hash With Insufficient Computational Effort in the jose library allows an attacker who obtains a password-encrypted private-key export to recover the private key through an offline password-cracking attack. When jose exports a password-encrypted private key with jose_jwk:to_der/2 (JOSE.JWK.to_der/2), the jose_jwk_der:to_binary/3 function in src/jwk/jose_jwk_der.erl serializes the key as a PKCS#8 EncryptedPrivateKeyInfo using the PBES2 scheme with hardcoded key-derivation parameters: PBKDF2-HMAC-SHA256 with an iteration count of 2048 and an 8-byte (64-bit) random salt. Neither value can be overridden by the caller. Both values are far below current guidance (OWASP recommends on the order of 600,000 iterations for PBKDF2-HMAC-SHA256, and NIST recommends salts of at least 128 bits), so the key-stretching work factor is roughly 300 times lower than intended and the short salt reduces the cost of precomputation across keys. The symmetric encryption (AES-256-CBC with a 16-byte random IV) is not affected; the weakness is entirely in the derivation strength. An attacker who obtains one of these exported blobs (for example from a backup, configuration repository, object storage, or logs) can mount a cheap offline dictionary or brute-force attack against the export password, and success yields the full private key. This issue affects jose: from 1.10.0 before 1.11.13.

jose_jwk:shared_secret/2 (exposed in Elixir as JOSE.JWK.shared_secret/2) derives an ECDH shared secret from two JWKs. Its first function clause only matches when both JWKs carry the same key type (kty) module, and its fallback clause re-invokes itself as shared_secret(from(YourJWK), from(MyJWK)). Because from/1 returns an already-parsed jose_jwk record unchanged, passing two JWKs whose key types differ (for example an EC key and an RSA key) makes the fallback clause re-enter with identical arguments, producing an unbounded tail-recursive loop that never returns and never crashes. An application that derives a shared secret from an externally supplied peer public key without first checking that the peer key's type and curve match its own key can be driven into this loop by an attacker-controlled JWK, pinning an Erlang scheduler at 100% CPU. Repeated requests exhaust the available schedulers, resulting in a denial of service. This issue affects jose: from 1.5.0 before 1.11.13.

Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in potatosalad jose (erlang-jose) allows a remote attacker to exhaust a node's memory with a small crafted JWE token. The jose_jwe_zip:uncompress/2 function in src/jwe/jose_jwe_zip.erl decompresses the DEFLATE-compressed plaintext of a JWE that carries the optional zip: DEF header by calling zlib:inflate/2 on the entire attacker-controlled stream, with no bound on the output size or the inflation ratio. Raw DEFLATE reaches ratios around 1000:1 on highly repetitive input, so a few-kilobyte token inflates to hundreds of megabytes or gigabytes in a single call. Decompression runs automatically during decryption through jose_jwe:block_decrypt/2 (JOSE.JWE.block_decrypt/2 in Elixir), before the recipient can inspect or reject the payload. With the common asymmetric key-management algorithms (RSA-OAEP, ECDH-ES) an attacker needs only the recipient's public key to craft such a token, so no authentication or secret material is required. A single small token can exhaust the node's memory and crash the BEAM, denying service to all users. This issue affects jose: from 1.0.0 before 1.11.13.

The pure-Erlang RSAES-PKCS1-v1_5 decryption in the jose_jwa_pkcs1 module is a Bleichenbacher padding oracle. eme_pkcs1_decode/2 returns the recovered message when a decrypted block has valid PKCS#1 v1.5 padding (a leading 0x00 0x02, a padding string of at least eight non-zero bytes, and a 0x00 separator) and returns a distinct error result otherwise, and rsaes_pkcs1_decrypt/2 additionally returns {error, {badsize, _}} when the length check fails. The implementation applies no implicit-rejection countermeasure (RFC 8017 §7.2.2): it does not substitute a deterministic pseudo-random plaintext on a padding failure, so a one-bit padding-conformance signal leaks to the caller. Because the underlying modular exponentiation in dp/2 is a raw, non-blinded crypto:mod_pow/3, the padding check also stays distinguishable by timing even when an application normalizes every failure to a single error value. An unauthenticated attacker who knows only the public RSA key and can submit ciphertexts to a decryption endpoint that unwraps RSA1_5 JWE keys (or otherwise calls decrypt_private/3 with rsa_pkcs1_padding) can use this oracle to recover the plaintext of intercepted ciphertexts, such as content-encryption keys and thus the protected message, or to forge signatures, through roughly 10^4 to 10^6 adaptive chosen-ciphertext queries. This issue affects jose: from 1.3.0 before 1.11.13.

The pure-Erlang AES-GCM fallback in jose_jwa_aes derives the number of verified authentication tag bits from the attacker-supplied tag itself. In the {aes_gcm, Bits} clause of block_decrypt/4, the incoming tag is guarded only by is_binary/1, with no check on its length. Verification in gcm_block_decrypt/6 then computes TBits = bit_size(T) and compares only those bits of the real 128-bit tag. An attacker who controls a JWE token can truncate the authentication tag to as little as 8 bits, so only 8 bits are ever checked. This reduces forgery resistance from 2^-128 to 2^-8, and a forged ciphertext is reliably accepted as authentic within 256 attempts without knowledge of the key (an authentication tag forgery and integrity bypass). Supplying a tag longer than 128 bits instead causes a badmatch that crashes the decrypting process. The fallback is reached through the public JWE decryption path whenever AES-GCM is not provided by a native crypto NIF, for example on FIPS or stripped or older OTP builds. This issue affects jose: from 1.2.0 before 1.11.13.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unauthenticated attacker may use reflected cross-site scripting in `phone provisioning HTTP error pages` to retrieve an authorized user's `AMI session cookie` and impersonate that user when `res_phoneprov` is enabled. The Asterisk HTTP web server, Asterisk Manager Interface (AMI), and AMI access via HTTP must all be enabled; each is disabled by default. The attacker must be able to connect to the HTTP server, which binds only to `127.0.0.1` by default even when enabled, and must convince the authorized user to click a malicious link. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, the LDAP realtime driver `res_config_ldap` may permit `LDAP filter injection` through a `SIP username`, allowing an unauthenticated attacker to make arbitrary LDAP queries using carefully crafted SIP packets and disclose information. The `res_config_ldap` module must be loaded and configured to access an LDAP server, which is not the default. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a heap-use-after-free in `PJSIP TCP/SDP` handling by sending a `SIP INVITE` over a connection-oriented transport and disconnecting before Asterisk responds with the `200 OK`. So far, the crash has only been reproduced when Asterisk is built with `Address Sanitizer`, which detects the issue. `Address Sanitizer` is a development tool with significant performance overhead and, according to the maintainer, is not used in production systems. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, insufficient bounds checking in the `chan_ooh323` `Q.931` `information-element parser` permits an `out-of-bounds read` that may allow an unauthenticated attacker to crash Asterisk using carefully crafted `setup packets`. The `chan_ooh323` addon channel driver must be explicitly compiled and installed, which is not the default, and its port must be publicly reachable. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.

A vulnerability has been found in subhajitkhan online-clinic-management-system up to e9ee77a8827a1446220fa07ee693dc4d9a29a578. Affected is an unknown function of the file patientregistration.php. Such manipulation of the argument pat_name leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet.

A flaw has been found in a2aproject a2a-java up to 1.2.0.Final. This impacts the function getMessage of the component JSON-RPC Error Handler. This manipulation causes information exposure through error message. The attack can be initiated remotely. Upgrading to version 1.3.0.Final will fix this issue. Patch name: bbee3369f3825d0fba2373d821f6dc6d4fc82ec0. Upgrading the affected component is advised.

A vulnerability was detected in a2aproject a2a-go up to 2.4.0. This affects the function CreateExecutor of the file a2asrv/agentexec.go of the component Push Notification Handler. The manipulation results in information exposure through error message. It is possible to launch the attack remotely. Upgrading to version 2.5.0 mitigates this issue. The patch is identified as f4d588216b0c9520e94d571bab725c38ce23064c. It is recommended to upgrade the affected component.

A security vulnerability has been detected in a2aproject a2a-dotnet up to 1.0.0-preview2. The impacted element is the function A2AJsonRpcProcessor.ProcessRequestAsync of the file src/A2A.AspNetCore/A2AJsonRpcProcessor.cs of the component Parser. The manipulation leads to information exposure through error message. It is possible to initiate the attack remotely. Upgrading to version 1.0.0-preview3 is sufficient to resolve this issue. The identifier of the patch is ccbd12b6108a6a8f0fd5d8b4a9ece3c8a94ba1e4. Upgrading the affected component is recommended.

Tornado is a Python web framework and asynchronous networking library. Prior to 6.6.0, Tornado decodes HTTP/1.1 chunked transfer encoding by processing body data that has already arrived without yielding to the event loop. A remote unauthenticated peer can send millions of one-byte chunks to monopolize the process event loop and stall every other connection served by that process, while lowering max_body_size only limits the duration of each request. For handlers that do not use @stream_request_body, retaining each chunk as a separate object can consume roughly twenty times the received body size, and SimpleAsyncHTTPClient has the same event-loop behavior when reading a response from a malicious server. This issue is fixed in version 6.6.0.

Rembg is a tool to remove images background. Prior to 2.0.82, the public /api/remove endpoint passes attacker-controlled extras.sam_model through rembg/commands/s_command.py to rembg/sessions/sam.py, where it is interpolated into SAM filenames and GitHub download URLs passed to pooch.retrieve() without a pinned hash. An unauthenticated attacker can supply a sam_model value combining path traversal with URL fragment syntax to exploit the HTTP request discarding the fragment while the local POSIX path retains it. The first request primes the attacker-selected path tree, and an identical repeated request downloads malicious ONNX encoder and decoder files beside a readable target file. The graphs can load the target through ONNX external data and encode its bytes into the returned PNG mask, disclosing complete files accessible to the rembg process and allowing arbitrary ONNX computation. This issue is fixed in version 2.0.82.

The LeRobot library is vulnerable to arbitrary code execution via unsafe dynamic class instantiation in the from_pretrained() method and related paths. When loading a policy's processor configuration from a repository, the library uses the class field within the JSON configuration to dynamically resolve and instantiate Python classes using importlib.import_module() and getattr().

libosmo-sigtran through 2.2.1 contains an out-of-bounds read in the M3UA NOTIFY decoder in src/m3ua.c. This allows a remote attacker to obtain sensitive information.

libosmocore through 1.14.1 contains an out-of-bounds read in iuup_rx_initialization() in src/gsm/iuup.c. This allows a remote attacker to obtain sensitive information.

libosmocore through 1.14.1 contains out-of-bounds reads in the GSM 04.80 supplementary-service component parsers in src/gsm/gsm0480.c. This allows a remote attacker to obtain sensitive information.