Explore. Understand.
Stay ahead.

In the Linux kernel, the following vulnerability has been resolved: media: rkvdec: bound HEVC tile loops and PPS id to the array capacity compute_tiles_uniform() and compute_tiles_non_uniform() loop over num_tile_columns_minus1 + 1 / num_tile_rows_minus1 + 1 entries, and assemble_hw_pps() writes one COLUMN_WIDTH / ROW_HEIGHT register per tile and indexes priv_tbl->param_set[] by pic_parameter_set_id, all taken from the untrusted PPS. Use the bounded v4l2_hevc_pps_num_tile_columns() / v4l2_hevc_pps_num_tile_rows()…

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound the copy to the array capacity.

In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by tile_info->tile_cols and writes one descriptor per tile into the tile_info DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows come from the bitstream. Guard the division against a zero tile_cols by initialising the context-update values to zero and computing them only when tile_cols i…

In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info buffer, and programs the real tile_cols / tile_rows into the hardware. The tile group entry control is a dynamic array sized to the number of entries userspace…

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate AV1 tile counts The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[] arrays, as the divisor for context_update_tile_id, and their product bounds the per-tile descriptor buffers, but std_validate_compound() does not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / …

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Don't free the live ring's TPA state on queue restart failure bnxt_queue_mem_alloc() shallow copies the live RX ring into the clone: memcpy(clone, rxr, sizeof(*rxr)); the code currently clears pointers that the clone owns (such as rx_agg_bmap), but rx_tpa and rx_tpa_idx_map are left pointing at memory of the live ring that was cloned. If an allocation failure happens later and the err_free_tpa_info label is taken, the live ring's me…

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle buffer allocation failure in bnxt_rx_ring_reset() bnxt_rx_ring_reset() frees the ring buffers and then reallocates them, ignoring the result. bnxt_alloc_one_rx_ring() can fail in bnxt_alloc_one_tpa_info_data(), which returns -ENOMEM on the first failed allocation and leaves the remaining rxr->rx_tpa[] entries zeroed. The error isn't propagated up, so the loop in bnxt_rx_ring_reset continues and at the end the code re-enables TPA…

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Propagate RX ring init failures in bnxt_init_nic() bnxt_init_rx_rings() returns an error when bnxt_alloc_one_rx_ring() fails, but bnxt_init_nic() discards that return value and calls bnxt_init_chip(), which enables TPA. If an allocation fails, this could leave rxr->rx_tpa[] partially zeroed and TPA would be enabled over an array with zeroed entries. This would lead to a zeroed DMA address being handed out if the agg_idx is translated to…

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Propagate TPA buffer allocation failures in bnxt_queue_mem_alloc() bnxt_alloc_one_tpa_info_data() returns -ENOMEM as soon as one allocation fails. This leaves the remaining rxr->rx_tpa[] entries zeroed. bnxt_queue_mem_alloc() discards that return value, so the partially initialized ring is installed by bnxt_queue_start(). Since the agg_id is picked by the hardware and bnxt_alloc_agg_idx maps it to a SW index in rxr->rx_tpa[], it is pos…

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Bound SW TPA IDs to prevent crashes FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range 0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a software ID which is used to index rxr->rx_tpa, and to generate a mapping between FW IDs and the wrapped software ID. On a 57608 with firmware version 233, the firmware advertises 32…

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Prevent queue stop with deferred completions When the driver receives a burst of packets, it can mark a BD with the NO_CMPL bit to defer completions. The expectation is that the last packet in the ring will have this bit unset and the completion generated by that packet will cleanup that packet and the ones preceding it. This helps to reduce the number of completions fired. The suppressed completions are controlled by the driver and the…

In the Linux kernel, the following vulnerability has been resolved: mptcp: syncookies: remember the request backup flag Instead of using an uninitialised bit when copying the info in subflow_ulp_clone(). To fix this, no need to extend the join_entry structure: backup is coming from struct mptcp_subflow_request_sock, only one bit. Do the same here by using one bit for both.

In the Linux kernel, the following vulnerability has been resolved: mptcp: prevent race between disconnect() and rtx Sashiko noted that the two event can race, leading to inconsistent status. Prevent the race using the synchronous timer stop operation.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0 The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement entry alive when removing the id 0 endpoint. This happens because the id 0 removal path does not tear down pending announcements, unlike the non-zero id path. When the PM later reselects id 0 after adding another signal endpoint, it finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel()) in mptcp…

In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short READ responses in CIFSSMBRead() CIFSSMBRead() reads DataLengthHigh, DataLength and DataOffset out of the READ_RSP returned by the server without first checking that a whole READ_RSP was actually received. The length of the response is recorded in rsp_iov.iov_len, but nothing constrains it to be at least read_rsp_size before those fields are dereferenced. A malicious or compromised SMB1 server can return a response short…

In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.idmap descriptions cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields withou…

In the Linux kernel, the following vulnerability has been resolved: smb: client: reject out-of-bounds DataOffset in CIFSSMBRead() The SMB1 synchronous read helper CIFSSMBRead() validates the server's DataLength against CIFSMaxBufSize and the caller's count, but never validates DataOffset. The copy source is formed as &pSMBr->hdr.Protocol + le16_to_cpu(pSMBr->DataOffset) and memcpy()'d for DataLength bytes with no check that the [DataOffset, DataOffset + DataLength) range lies within the response actually recei…

In the Linux kernel, the following vulnerability has been resolved: smb: client: pin DFS superblock in iterator callback tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super() takes its active reference only after iterate_supers_type() has dropped s_umount and its passive reference. Concurrent DFS automount expiry can therefore free the superblock before cifs_sb_active() uses it. A deterministic KASAN test reproduces the race as: BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80 Th…

In the Linux kernel, the following vulnerability has been resolved: smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid When the administrator mounts with forceuid or forcegid (uid=/gid= mount options), they expect all files to appear owned by the specified user/group. However, several code paths unconditionally called sid_to_id() to overwrite cf_uid/cf_gid with server-provided values, ignoring the administrator's explicit override: - smb311_posix_info_to_fattr() (stat via POSIX extensions) - …

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix one-byte OOB read in smb2_parse_native_symlink() When parsing a share-root relative native symlink, memcpy copies smb_target+1 (skipping the leading separator) but uses strlen(smb_target)+1 as the length, reading one byte past the allocated buffer. This fixes the following KASAN splat when accessing an SMB symlink with a target of '\a\b': BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0 Read of size 5…

In the Linux kernel, the following vulnerability has been resolved: smb: client: fail DACL rewrite when the new DACL exceeds 64K replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of the DACL they build in a u16. That accumulator can wrap. validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) / 20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with one carrying SID_MAX_SUB_AUTHORITIES sub-au…

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix cifsFileInfo reference leak in deferred close When cifs_close() defers a close, it hands the cifsFileInfo reference of the closing struct file to the queued work. Each execution of smb2_deferred_work_close() drops one such reference. deferred_close_scheduled can be false while the work is pending: the workqueue clears PENDING when the callback starts to run, before the callback clears the flag under deferred_lock. A close in tha…

In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount in cifs_queue_oplock_break() cifs_queue_oplock_break() unconditionally takes a reference on the target file before queueing cifs_oplock_break(). Only that work item decreases the reference counter again. If another oplock break arrives while that work is still queued, queue_work() will return false and not queue this second work item. As a result, we will never reach the point to drop the file reference again …

In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount when cifs_sb_tlink() fails cifs_oplock_break() takes over the reference that cifs_queue_oplock_break() acquired when it queued the work, and drops it with _cifsFileInfo_put() once the break has been processed. Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which point cifs_oplock_break() returns without putting the file reference, mirroring the reference leak we already fixed in the companion…