← Back to CVE Explorer

CVE-2026-80999

Full vulnerability record from the local CVENow database.

Description

In the Linux kernel, the following vulnerability has been resolved: net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from the probe path, which may sleep and is not timing-critical. When the reset GPIO is provided by a sleeping controller such as an I2C I/O expander, gpiod_set_value() warns: WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61 Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT) Workqueue: events_unbound deferred_probe_work_func pc : gpiod_set_value+0x44/0x80 lr : rtl83xx_probe+0x1d8/0x3a0 Call trace: gpiod_set_value+0x44/0x80 (P) rtl83xx_probe+0x1d8/0x3a0 realtek_mdio_probe+0x24/0xa0 mdio_probe+0x38/0x78 really_probe+0xc4/0x3e0 __driver_probe_device+0x15c/0x1b8 driver_probe_device+0xb4/0x120 __device_attach_driver+0xb8/0x1a0 bus_for_each_drv+0x88/0xf0 __device_attach+0xa0/0x1d8 device_initial_probe+0x54/0x68 bus_probe_device+0x38/0xa0 deferred_probe_work_func+0xb8/0x120 process_one_work+0x184/0x4e8 worker_thread+0x188/0x308 kthread+0x130/0x150 ret_from_fork+0x10/0x20 Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can be used without triggering the warning. The reset GPIO has been driven with the non-sleeping gpiod_set_value() since the driver was added in v4.19. The call has since been refactored across several files - from realtek-smi.c / realtek-mdio.c into the common rtl83xx.c module and then into the rtl83xx_reset_assert() and rtl83xx_reset_deassert() helpers (both in v6.9). This patch therefore applies as-is only to kernels that carry those helpers (v6.9+); older stable kernels need the same gpiod_set_value_cansleep() conversion at the corresponding open-coded call sites.

Severity
Not scored
CVSS score
Not available
Vulnerability status
Received
Source identifier
416baaa9-dc9f-4396-8d5f-8c081fb06d67
Published
2026-09-11 20:19:07.433000
Last modified
2026-10-19 09:17:32.893000
View original CVE JSON
{
  "id": "CVE-2026-80999",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "published": "2026-09-11T20:19:07.433",
  "lastModified": "2026-10-19T09:17:32.893",
  "vulnStatus": "Received",
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO\n\nrtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from\nthe probe path, which may sleep and is not timing-critical.  When the\nreset GPIO is provided by a sleeping controller such as an I2C I/O\nexpander, gpiod_set_value() warns:\n\n  WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61\n  Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)\n  Workqueue: events_unbound deferred_probe_work_func\n  pc : gpiod_set_value+0x44/0x80\n  lr : rtl83xx_probe+0x1d8/0x3a0\n  Call trace:\n   gpiod_set_value+0x44/0x80 (P)\n   rtl83xx_probe+0x1d8/0x3a0\n   realtek_mdio_probe+0x24/0xa0\n   mdio_probe+0x38/0x78\n   really_probe+0xc4/0x3e0\n   __driver_probe_device+0x15c/0x1b8\n   driver_probe_device+0xb4/0x120\n   __device_attach_driver+0xb8/0x1a0\n   bus_for_each_drv+0x88/0xf0\n   __device_attach+0xa0/0x1d8\n   device_initial_probe+0x54/0x68\n   bus_probe_device+0x38/0xa0\n   deferred_probe_work_func+0xb8/0x120\n   process_one_work+0x184/0x4e8\n   worker_thread+0x188/0x308\n   kthread+0x130/0x150\n   ret_from_fork+0x10/0x20\n\nSwitch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can\nbe used without triggering the warning.\n\nThe reset GPIO has been driven with the non-sleeping gpiod_set_value()\nsince the driver was added in v4.19.  The call has since been refactored\nacross several files - from realtek-smi.c / realtek-mdio.c into the common\nrtl83xx.c module and then into the rtl83xx_reset_assert() and\nrtl83xx_reset_deassert() helpers (both in v6.9).  This patch therefore\napplies as-is only to kernels that carry those helpers (v6.9+); older\nstable kernels need the same gpiod_set_value_cansleep() conversion at the\ncorresponding open-coded call sites."
    }
  ],
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "vendor": "Linux",
          "product": "Linux",
          "defaultStatus": "unaffected",
          "programFiles": [
            "drivers/net/dsa/realtek/rtl83xx.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "versions": [
            {
              "version": "d8652956cf37c5caa8c19e0b99ce5ca235c6d5de",
              "lessThan": "c32cf5292a0dd70c4afc138b4dc45743a190cd5a",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "d8652956cf37c5caa8c19e0b99ce5ca235c6d5de",
              "lessThan": "f71087e7c63aa3e99bf65d7ddf91eb4fd3545778",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "d8652956cf37c5caa8c19e0b99ce5ca235c6d5de",
              "lessThan": "1610a8c2b93e815e3dc8643a2a69ab1c37975a6a",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "d8652956cf37c5caa8c19e0b99ce5ca235c6d5de",
              "lessThan": "fb58b6a696b30bcbfbe0cfc0a91b19c816a955fc",
              "versionType": "git",
              "status": "affected"
            }
          ]
        },
        {
          "vendor": "Linux",
          "product": "Linux",
          "defaultStatus": "affected",
          "programFiles": [
            "drivers/net/dsa/realtek/rtl83xx.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "versions": [
            {
              "version": "4.19",
              "status": "affected"
            },
            {
              "version": "0",
              "lessThan": "4.19",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "6.12.109",
              "lessThanOrEqual": "6.12.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "6.18.50",
              "lessThanOrEqual": "6.18.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "7.2.4",
              "lessThanOrEqual": "7.2.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "7.3",
              "lessThanOrEqual": "*",
              "versionType": "original_commit_for_fix",
              "status": "unaffected"
            }
          ]
        }
      ]
    }
  ],
  "metrics": {},
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/1610a8c2b93e815e3dc8643a2a69ab1c37975a6a",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/c32cf5292a0dd70c4afc138b4dc45743a190cd5a",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/f71087e7c63aa3e99bf65d7ddf91eb4fd3545778",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/fb58b6a696b30bcbfbe0cfc0a91b19c816a955fc",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ]
}