← Back to CVE Explorer

CVE-2026-87039

Full vulnerability record from the local CVENow database.

Description

The user-mode syscall verifier z_vrfy_i2s_configure() in drivers/i2s/i2s_handlers.c copies the caller's struct i2s_config in from user memory and then, when cfg->frame_clk_freq is 0 (the API's "unconfigure the stream" request), jumps straight to z_impl_i2s_configure() without performing the K_SYSCALL_OBJ(config.mem_slab, K_OBJ_MEM_SLAB) ownership/type check or the block_size sanity check. The mem_slab field is a struct k_mem_slab *, so on that path a completely unvalidated, user-chosen pointer reaches driver code that is entitled to trust it as a real kernel object. Any thread running under CONFIG_USERSPACE that has access to an I2S device object can trigger this with a single i2s_configure() call. Most in-tree drivers special-case frame_clk_freq == 0 and never store the caller's structure, but drivers/i2s/i2s_litex.c does not: i2s_litex_configure() only logs a warning for a mismatched frame clock, then memcpy()s the caller's config into stream->cfg and marks the stream I2S_STATE_READY. A subsequent i2s_trigger() with I2S_TRIGGER_START enables the FIFO interrupt, and the interrupt handlers i2s_litex_isr_rx() / i2s_litex_isr_tx() then call k_mem_slab_alloc() and k_mem_slab_free() on the attacker-supplied pointer in supervisor context. The result is an arbitrary-pointer read/write primitive executed by the kernel on behalf of an unprivileged thread — k_mem_slab_alloc() takes a spinlock at slab->lock and reads and writes slab->free_list and the link word inside the returned "block" — which defeats the CONFIG_USERSPACE isolation boundary entirely. The same missing validation is a hazard for out-of-tree I2S drivers that retain the configuration on the unconfigure path. Builds without CONFIG_USERSPACE are unaffected, since the verifier is not used. The fix zeroes config.mem_slab and config.block_size on the unconfigure path so the driver can never receive an unvalidated pointer, while still allowing a stream to be unconfigured by a caller that does not own a memory slab, as the API documents.

Severity
HIGH
CVSS score
7.8 (v3.1)
Vulnerability status
Awaiting Analysis
Source identifier
Published
2026-11-04 06:17:06.623000
Last modified
2026-11-04 06:17:06.733000
View original CVE JSON
{
  "id": "CVE-2026-87039",
  "sourceIdentifier": "[email protected]",
  "published": "2026-11-04T06:17:06.623",
  "lastModified": "2026-11-04T06:17:06.733",
  "vulnStatus": "Awaiting Analysis",
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "The user-mode syscall verifier z_vrfy_i2s_configure() in drivers/i2s/i2s_handlers.c copies the caller's struct i2s_config in from user memory and then, when cfg->frame_clk_freq is 0 (the API's \"unconfigure the stream\" request), jumps straight to z_impl_i2s_configure() without performing the K_SYSCALL_OBJ(config.mem_slab, K_OBJ_MEM_SLAB) ownership/type check or the block_size sanity check. The mem_slab field is a struct k_mem_slab *, so on that path a completely unvalidated, user-chosen pointer reaches driver code that is entitled to trust it as a real kernel object.\n\nAny thread running under CONFIG_USERSPACE that has access to an I2S device object can trigger this with a single i2s_configure() call. Most in-tree drivers special-case frame_clk_freq == 0 and never store the caller's structure, but drivers/i2s/i2s_litex.c does not: i2s_litex_configure() only logs a warning for a mismatched frame clock, then memcpy()s the caller's config into stream->cfg and marks the stream I2S_STATE_READY. A subsequent i2s_trigger() with I2S_TRIGGER_START enables the FIFO interrupt, and the interrupt handlers i2s_litex_isr_rx() / i2s_litex_isr_tx() then call k_mem_slab_alloc() and k_mem_slab_free() on the attacker-supplied pointer in supervisor context.\n\nThe result is an arbitrary-pointer read/write primitive executed by the kernel on behalf of an unprivileged thread — k_mem_slab_alloc() takes a spinlock at slab->lock and reads and writes slab->free_list and the link word inside the returned \"block\" — which defeats the CONFIG_USERSPACE isolation boundary entirely. The same missing validation is a hazard for out-of-tree I2S drivers that retain the configuration on the unconfigure path. Builds without CONFIG_USERSPACE are unaffected, since the verifier is not used.\n\nThe fix zeroes config.mem_slab and config.block_size on the unconfigure path so the driver can never receive an unvalidated pointer, while still allowing a stream to be unconfigured by a caller that does not own a memory slab, as the API documents."
    }
  ],
  "affected": [
    {
      "source": "[email protected]",
      "affectedData": [
        {
          "vendor": "zephyrproject",
          "product": "zephyr",
          "defaultStatus": "unaffected",
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "packageName": "zephyr",
          "programFiles": [
            "drivers/i2s/i2s_handlers.c",
            "drivers/i2s/i2s_litex.c"
          ],
          "programRoutines": [
            {
              "name": "i2s_litex_configure"
            },
            {
              "name": "i2s_litex_isr_rx"
            },
            {
              "name": "z_vrfy_i2s_configure"
            }
          ],
          "versions": [
            {
              "version": "4.4.0",
              "lessThan": "4.5.0",
              "versionType": "semver",
              "status": "affected"
            }
          ]
        }
      ]
    }
  ],
  "metrics": {
    "cvssMetricV31": [
      {
        "source": "[email protected]",
        "type": "Secondary",
        "cvssData": {
          "version": "3.1",
          "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "attackVector": "LOCAL",
          "attackComplexity": "HIGH",
          "privilegesRequired": "LOW",
          "userInteraction": "NONE",
          "scope": "CHANGED",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "availabilityImpact": "HIGH"
        },
        "exploitabilityScore": 1.1,
        "impactScore": 6.0
      }
    ]
  },
  "weaknesses": [
    {
      "source": "[email protected]",
      "type": "Secondary",
      "description": [
        {
          "lang": "en",
          "value": "CWE-787"
        }
      ]
    }
  ],
  "references": [
    {
      "url": "https://github.com/zephyrproject-rtos/zephyr/commit/e9898c4d22f69575d9b5f297b3df130ceaff1b8f",
      "source": "[email protected]"
    },
    {
      "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-g43m-x6vj-5cg2",
      "source": "[email protected]"
    }
  ]
}