CVE-2026-89472

Full vulnerability record from the local CVENow database.

Description

In the Linux kernel, the following vulnerability has been resolved: power: supply: charger-manager: register regulators before exposing sysfs charger_manager_remove() and the err_reg_extcon probe error path free each charger regulator with regulator_put() before tearing down the power_supply sysfs entries (power_supply_unregister()). charger_manager_remove() also calls try_charger_enable(cm, false) after the regulator_put() loop. A concurrent write to a charger's externally_control sysfs attribute that lands between regulator_put() and power_supply_unregister() can run charger_externally_control_store() and call try_charger_enable(), which, when charging is enabled, dereferences the already-freed consumer handle. When charging is enabled, try_charger_enable(cm, false) in .remove() also dereferences the freed handles directly. Both leave use-after-free windows. Symmetrically, probe registers the sysfs entries (power_supply_register) before acquiring the regulators (regulator_get, inside charger_manager_register_extcon), so userspace can reach externally_control before the regulators are available. Split charger_manager_register_extcon() on the sync/async boundary: charger_manager_get_regulators() (regulator_get only, no async producer) now runs before power_supply_register() so sysfs is not live before regulators are available, and charger_manager_register_extcon() keeps only the extcon notifier/work setup, still after power_supply_register() so a power_supply_register() failure cannot reach extcon setup. This keeps the sysfs setup/teardown ordering symmetric without introducing an asynchronous producer on the earlier probe-error path. Move power_supply_unregister() and try_charger_enable(cm, false) ahead of the regulator_put() loop on both teardown paths, and adjust err_reg_extcon (power_supply_unregister() then fall through err_regulator for regulator_put(); get_regulators self-rolls back on its own failure). This does not address the separate extcon-notifier-driven deref of the same handles, which needs its own synchronization design. Found by an in-house static analysis tool.

Severity

HIGH

CVSS score

7.8 (v3.1)

Vulnerability status

Received

Source identifier

416baaa9-dc9f-4396-8d5f-8c081fb06d67

Published

2026-09-11 20:19:28.393000

Last modified

2026-10-30 13:20:17.203000

View original CVE JSON

{
  "id": "CVE-2026-89472",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "published": "2026-09-11T20:19:28.393",
  "lastModified": "2026-10-30T13:20:17.203",
  "vulnStatus": "Received",
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\npower: supply: charger-manager: register regulators before exposing sysfs\n\ncharger_manager_remove() and the err_reg_extcon probe error path free each\ncharger regulator with regulator_put() before tearing down the power_supply\nsysfs entries (power_supply_unregister()). charger_manager_remove() also\ncalls try_charger_enable(cm, false) after the regulator_put() loop. A\nconcurrent write to a charger's externally_control sysfs attribute that\nlands between regulator_put() and power_supply_unregister() can run\ncharger_externally_control_store() and call try_charger_enable(), which,\nwhen charging is enabled, dereferences the already-freed consumer handle.\nWhen charging is enabled, try_charger_enable(cm, false) in .remove() also\ndereferences the freed handles directly. Both leave use-after-free windows.\nSymmetrically, probe registers the sysfs entries (power_supply_register)\nbefore acquiring the regulators (regulator_get, inside\ncharger_manager_register_extcon), so userspace can reach externally_control\nbefore the regulators are available.\n\nSplit charger_manager_register_extcon() on the sync/async boundary:\ncharger_manager_get_regulators() (regulator_get only, no async producer)\nnow runs before power_supply_register() so sysfs is not live before\nregulators are available, and charger_manager_register_extcon() keeps only\nthe extcon notifier/work setup, still after power_supply_register() so a\npower_supply_register() failure cannot reach extcon setup. This keeps the\nsysfs setup/teardown ordering symmetric without introducing an asynchronous\nproducer on the earlier probe-error path.\n\nMove power_supply_unregister() and try_charger_enable(cm, false) ahead of\nthe regulator_put() loop on both teardown paths, and adjust err_reg_extcon\n(power_supply_unregister() then fall through err_regulator for\nregulator_put(); get_regulators self-rolls back on its own failure).\n\nThis does not address the separate extcon-notifier-driven deref of the same\nhandles, which needs its own synchronization design.\n\nFound by an in-house static analysis tool."
    }
  ],
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "vendor": "Linux",
          "product": "Linux",
          "defaultStatus": "unaffected",
          "programFiles": [
            "drivers/power/supply/charger-manager.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "versions": [
            {
              "version": "3950c7865cd7c963982a2c94457182b96732f4c9",
              "lessThan": "5763750916d28a29f1375a14dd6dadd5f2d2e178",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "3950c7865cd7c963982a2c94457182b96732f4c9",
              "lessThan": "6e1645a6ee85d070c2d8dd847f1ce110dc2455c1",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "3950c7865cd7c963982a2c94457182b96732f4c9",
              "lessThan": "af3ce383ba0d0d48957a22ac7058ff5698775898",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "3950c7865cd7c963982a2c94457182b96732f4c9",
              "lessThan": "86e4fa65368f3bbb506dddba8c9eedc75bd603b2",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "3950c7865cd7c963982a2c94457182b96732f4c9",
              "lessThan": "6d532582ff3c420598f02945b13184c738cc1581",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "3950c7865cd7c963982a2c94457182b96732f4c9",
              "lessThan": "c57cb36f76eb7ced45f57af1a890d8f3a6d76342",
              "versionType": "git",
              "status": "affected"
            }
          ]
        },
        {
          "vendor": "Linux",
          "product": "Linux",
          "defaultStatus": "affected",
          "programFiles": [
            "drivers/power/supply/charger-manager.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "versions": [
            {
              "version": "3.7",
              "status": "affected"
            },
            {
              "version": "0",
              "lessThan": "3.7",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "6.1.191",
              "lessThanOrEqual": "6.1.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "6.6.160",
              "lessThanOrEqual": "6.6.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "6.12.109",
              "lessThanOrEqual": "6.12.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "6.18.50",
              "lessThanOrEqual": "6.18.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "7.2.4",
              "lessThanOrEqual": "7.2.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "7.3",
              "lessThanOrEqual": "*",
              "versionType": "original_commit_for_fix",
              "status": "unaffected"
            }
          ]
        }
      ]
    }
  ],
  "metrics": {
    "cvssMetricV31": [
      {
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary",
        "cvssData": {
          "version": "3.1",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "attackVector": "LOCAL",
          "attackComplexity": "LOW",
          "privilegesRequired": "LOW",
          "userInteraction": "NONE",
          "scope": "UNCHANGED",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "availabilityImpact": "HIGH"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9
      }
    ]
  },
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/5763750916d28a29f1375a14dd6dadd5f2d2e178",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/6d532582ff3c420598f02945b13184c738cc1581",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/6e1645a6ee85d070c2d8dd847f1ce110dc2455c1",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/86e4fa65368f3bbb506dddba8c9eedc75bd603b2",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/af3ce383ba0d0d48957a22ac7058ff5698775898",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/c57cb36f76eb7ced45f57af1a890d8f3a6d76342",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ]
}