CVE-2026-90587
Full vulnerability record from the local CVENow database.
Description
usbh_device_init() in subsys/usb/host/usbh_device.c rejects a device whose device descriptor advertises bNumConfigurations == 0, but it only logs the error and jumps to the cleanup label without setting the return code. At that point the local err is still 0 from the preceding successful descriptor read, so the function returns success while having skipped usbh_device_set_configuration() — the only place udev->cfg_desc is allocated. The device structure is zero-initialised by usbh_device_alloc(), so udev->cfg_desc remains NULL. usbh_device_connect() treats the zero return as a successful enumeration and calls usbh_class_probe_device(), which starts its descriptor walk from udev->cfg_desc. usbh_desc_get_next_function() passes that NULL pointer to usbh_desc_is_valid(), whose only guard compares the caller-supplied size, so head->bLength is read through a NULL pointer. The condition is triggered entirely by the attached peripheral: attaching a USB device (or any USB gadget emulating one) that reports bNumConfigurations = 0 reaches the defect directly from the UHC_EVT_DEV_CONNECTED_FS/_HS event handler in subsys/usb/host/usbh_core.c, with no authentication and no user interaction beyond the physical attachment. On targets where page zero is unmapped or CONFIG_NULL_POINTER_EXCEPTION_DETECTION is enabled this raises a fatal exception in the USB host thread, denying service to the host. Where address zero is readable, the descriptor walker instead parses low memory as a descriptor chain and can dispatch a class probe() with attacker-influenced values, causing further out-of-bounds reads through the still-NULL udev->cfg_desc in usbh_desc_get_iface(). No attacker-controlled write was identified, so the impact is availability plus a bounded out-of-bounds read. Note that CONFIG_USB_HOST_STACK is marked experimental.
View original CVE JSON
{
"id": "CVE-2026-90587",
"sourceIdentifier": "[email protected]",
"published": "2026-11-09T22:18:56.970",
"lastModified": "2026-11-09T22:18:57.087",
"vulnStatus": "Awaiting Analysis",
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "usbh_device_init() in subsys/usb/host/usbh_device.c rejects a device whose device descriptor advertises bNumConfigurations == 0, but it only logs the error and jumps to the cleanup label without setting the return code. At that point the local err is still 0 from the preceding successful descriptor read, so the function returns success while having skipped usbh_device_set_configuration() — the only place udev->cfg_desc is allocated. The device structure is zero-initialised by usbh_device_alloc(), so udev->cfg_desc remains NULL.\n\nusbh_device_connect() treats the zero return as a successful enumeration and calls usbh_class_probe_device(), which starts its descriptor walk from udev->cfg_desc. usbh_desc_get_next_function() passes that NULL pointer to usbh_desc_is_valid(), whose only guard compares the caller-supplied size, so head->bLength is read through a NULL pointer.\n\nThe condition is triggered entirely by the attached peripheral: attaching a USB device (or any USB gadget emulating one) that reports bNumConfigurations = 0 reaches the defect directly from the UHC_EVT_DEV_CONNECTED_FS/_HS event handler in subsys/usb/host/usbh_core.c, with no authentication and no user interaction beyond the physical attachment.\n\nOn targets where page zero is unmapped or CONFIG_NULL_POINTER_EXCEPTION_DETECTION is enabled this raises a fatal exception in the USB host thread, denying service to the host. Where address zero is readable, the descriptor walker instead parses low memory as a descriptor chain and can dispatch a class probe() with attacker-influenced values, causing further out-of-bounds reads through the still-NULL udev->cfg_desc in usbh_desc_get_iface(). No attacker-controlled write was identified, so the impact is availability plus a bounded out-of-bounds read. Note that CONFIG_USB_HOST_STACK is marked experimental."
}
],
"affected": [
{
"source": "[email protected]",
"affectedData": [
{
"vendor": "zephyrproject",
"product": "zephyr",
"defaultStatus": "unaffected",
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"packageName": "zephyr",
"programFiles": [
"subsys/usb/host/usbh_class.c",
"subsys/usb/host/usbh_desc.c",
"subsys/usb/host/usbh_device.c"
],
"programRoutines": [
{
"name": "usbh_class_probe_device"
},
{
"name": "usbh_desc_get_next_function"
},
{
"name": "usbh_device_init"
}
],
"versions": [
{
"version": "4.4.0",
"lessThan": "4.5.0",
"versionType": "semver",
"status": "affected"
}
]
}
]
}
],
"metrics": {
"cvssMetricV31": [
{
"source": "[email protected]",
"type": "Secondary",
"cvssData": {
"version": "3.1",
"vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"baseScore": 4.6,
"baseSeverity": "MEDIUM",
"attackVector": "PHYSICAL",
"attackComplexity": "LOW",
"privilegesRequired": "NONE",
"userInteraction": "NONE",
"scope": "UNCHANGED",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"availabilityImpact": "HIGH"
},
"exploitabilityScore": 0.9,
"impactScore": 3.6
}
]
},
"weaknesses": [
{
"source": "[email protected]",
"type": "Secondary",
"description": [
{
"lang": "en",
"value": "CWE-476"
}
]
}
],
"references": [
{
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/04e4284b4c3d3cd41791d44d7c39361e268b4d02",
"source": "[email protected]"
},
{
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-9pxv-6992-2g24",
"source": "[email protected]"
}
]
}