CVE-2026-93119

Full vulnerability record from the local CVENow database.

Description

In the Linux kernel, the following vulnerability has been resolved: usb: ljca: bound bank_num in ljca_enumerate_gpio() ljca_enumerate_gpio() reads desc->bank_num from the device and loops valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[] holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries. Two checks run before the loop. The reply length must match struct_size(desc, bank_desc, bank_num). The product pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one bounds bank_num against the size of valid_pin[]. The reply is capped at LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7 still passes both checks. gpio_num is 63 and the reply is 56 bytes. The loop then writes nine u32 into the two entry array and overruns valid_pin[] on the stack. A broken or malicious LJCA device can therefore overflow the stack. Reject a bank_num that does not fit valid_pin[].

Severity

Not scored

CVSS score

Not available

Vulnerability status

Received

Source identifier

416baaa9-dc9f-4396-8d5f-8c081fb06d67

Published

2026-09-17 17:18:06.553000

Last modified

2026-10-19 10:17:01.887000

View original CVE JSON

{
  "id": "CVE-2026-93119",
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "published": "2026-09-17T17:18:06.553",
  "lastModified": "2026-10-19T10:17:01.887",
  "vulnStatus": "Received",
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nusb: ljca: bound bank_num in ljca_enumerate_gpio()\n\nljca_enumerate_gpio() reads desc->bank_num from the device and loops\nvalid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[]\nholds only LJCA_MAX_GPIO_NUM / 32 = 2 entries.\n\nTwo checks run before the loop. The reply length must match\nstruct_size(desc, bank_desc, bank_num). The product\npins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one\nbounds bank_num against the size of valid_pin[]. The reply is capped at\nLJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits\nbank_num to 9. A device that reports bank_num 9 with pins_per_bank 7\nstill passes both checks. gpio_num is 63 and the reply is 56 bytes. The\nloop then writes nine u32 into the two entry array and overruns\nvalid_pin[] on the stack.\n\nA broken or malicious LJCA device can therefore overflow the stack.\nReject a bank_num that does not fit valid_pin[]."
    }
  ],
  "affected": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "affectedData": [
        {
          "vendor": "Linux",
          "product": "Linux",
          "defaultStatus": "unaffected",
          "programFiles": [
            "drivers/usb/misc/usb-ljca.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "versions": [
            {
              "version": "acd6199f195d6de814ac4090ce0864a613b1580e",
              "lessThan": "0069593170a3d177de793c9a0b36989c4f069111",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "acd6199f195d6de814ac4090ce0864a613b1580e",
              "lessThan": "aed958c4f784a29cf42abb3e54af51a16bddde46",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "acd6199f195d6de814ac4090ce0864a613b1580e",
              "lessThan": "9c4bc8f7426aa001387800bf0140bfc5087a6de3",
              "versionType": "git",
              "status": "affected"
            },
            {
              "version": "acd6199f195d6de814ac4090ce0864a613b1580e",
              "lessThan": "dd9483726d0f16c1a56879c3edb65128259a4e2b",
              "versionType": "git",
              "status": "affected"
            }
          ]
        },
        {
          "vendor": "Linux",
          "product": "Linux",
          "defaultStatus": "affected",
          "programFiles": [
            "drivers/usb/misc/usb-ljca.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "versions": [
            {
              "version": "6.7",
              "status": "affected"
            },
            {
              "version": "0",
              "lessThan": "6.7",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "6.12.110",
              "lessThanOrEqual": "6.12.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "6.18.52",
              "lessThanOrEqual": "6.18.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "7.2.6",
              "lessThanOrEqual": "7.2.*",
              "versionType": "semver",
              "status": "unaffected"
            },
            {
              "version": "7.3",
              "lessThanOrEqual": "*",
              "versionType": "original_commit_for_fix",
              "status": "unaffected"
            }
          ]
        }
      ]
    }
  ],
  "metrics": {},
  "references": [
    {
      "url": "https://git.kernel.org/stable/c/0069593170a3d177de793c9a0b36989c4f069111",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/9c4bc8f7426aa001387800bf0140bfc5087a6de3",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/aed958c4f784a29cf42abb3e54af51a16bddde46",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    },
    {
      "url": "https://git.kernel.org/stable/c/dd9483726d0f16c1a56879c3edb65128259a4e2b",
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ]
}